[connect via dynamic source]
Geekvape B Series Replacement Coils — Buy in Dubai, UAE
Which Geekvape B Series coil fits your Aegis? Vaparazzi carries the full seven-resistance B Series range — B0.15Ω, B0.2Ω, B0.3Ω, B0.4Ω, B0.6Ω, B0.8Ω and B1.2Ω — at AED 50 for a pack of 5, with fast delivery across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain.
The B Series is Geekvape's Boost mesh coil platform. Every coil in the range uses mesh heating for faster ramp-up and cleaner flavour, and the Boost revision roughly doubled coil life over the earlier version. Installation is plug-in: push the coil into the pod, prime it, and vape.
Which B Series Resistance Should You Buy?
B0.15Ω and B0.2Ω — direct lung, maximum vapour
The lowest resistances in the range, run at roughly 50–58W. Airiest draw and the biggest clouds. Best with 3mg or 6mg freebase e-liquid.
B0.3Ω and B0.4Ω — restricted direct lung
Run at roughly 30–38W and 25–33W respectively. The B0.3Ω is the resistance we stock most deeply and a common everyday choice for the Aegis Boost.
B0.6Ω and B0.8Ω — the middle ground
Around 15–25W. A loose mouth-to-lung or light restricted direct-lung draw that works with both nicotine salts and 50/50 freebase.
B1.2Ω — tight MTL, cigarette-style
Around 10–14W. The tightest draw in the range, lowest liquid consumption and longest coil life. Ideal for 20mg nicotine salts.
Product Specifications
-
Brand: Geekvape
-
Full range carried: B0.15Ω, B0.2Ω Mesh, B0.3Ω Mesh, B0.4Ω Mesh, B0.6Ω Mesh, B0.8Ω Mesh, B1.2Ω Mesh
-
Coil type: Boost mesh
-
Vaping styles: MTL, RDL and DTL
-
Installation: Plug in, press fit
-
Pack size: 5 coils per pack
-
Price (UAE): AED 50
Individual resistances rotate in and out of stock. Check the dropdown above for what is available today, or message us and we will tell you when a resistance is back in.
Frequently Asked Questions
Which devices do Geekvape B Series coils fit?
B Series coils fit any Geekvape device on the B Series platform, including the Aegis Boost and Boost Plus, the Aegis Hero and Hero 2 (H45), the B60 (Boost 2), the Z Nano tank series and the M100 (Aegis Mini 2). They do not fit Geekvape devices using the P Series or Z Series coil families, so check which coil your pod takes before ordering.
Which Geekvape B Series coil is best for nicotine salts?
Use the B1.2Ω or the B0.8Ω for 20mg nicotine salts. Both give a tight, cool mouth-to-lung draw at low wattage and use very little e-liquid, which is exactly what nicotine salt is formulated for. The B0.15Ω and B0.2Ω are far too airy for 20mg salt.
How often should I replace a B Series coil?
The Boost revision typically gives seven to fourteen days of use. Replace the coil when flavour turns muted or burnt, when vapour output drops, or when the pod begins to spit. Sweetened dessert and candy e-liquids caramelise on the mesh and shorten coil life noticeably.
What wattage should I run each B Series coil at?
B0.15Ω and B0.2Ω at 50–58W, B0.3Ω at 30–38W, B0.4Ω at 25–33W, B0.6Ω and B0.8Ω at 15–25W, and B1.2Ω at 10–14W. Start at the bottom of each range and work up until the flavour is where you want it.
Why does my new Geekvape coil taste burnt?
Nearly always because it was not primed. Drip e-liquid directly onto the exposed cotton ports, fill the pod, and leave it standing five to ten minutes before the first puff. Take the first few draws at low power. A coil that has been dry-fired once cannot be recovered.
Where can I buy Geekvape B Series coils in UAE?
Vaparazzi (vaparazzi.ae) carries the full B Series range at AED 50 per 5-pack, with fast delivery across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain.
⚠ For adults aged 18+ only. Use with nicotine-containing e-liquid; nicotine is an addictive chemical.
